I am scheduled to add a DTI card (part # NT7B74AAAA) and a T-1 clock ref card (part # NTBB24GA) to a MICS rel 7.1. I am somewhat familiar with the Norstar but if anyone knows of any road blocks or issues that might arise please let me know. The service is converting 6 existing analog lines to the T-1 along with 1 DID channel, I am also enabiling a PRI code that I purchased from a vendor to enable caller ID.
Your post is unclear.
Are you getting T1 service or PRI?
Your getting PRI just for Caller ID... not for DID?
Marv, as I understud the main purpouse is a CID but also he is geting only 1 DID as well
If that's the case, someone sure knows how to sell
So is this a T1 and a PRI on one circuit? In Canada it's either T1 or PRI if you want both it's 2 cicuits. You can't have both on one circuit.
One DID? Minimum here is a block of 50 numbers.
The single DID may just be the main billing number, which would work. Around here, Verizon sells DID’s in blocks of 20.