I have aquired a BCM 400 and I do not know the Ip address or Password I have tried using both lan ports and the Serial port to connect and have had no luck
Thanks
Hire a qualified Nortel technician who can make changes on your BCM.
i would speak to whomever you acquired it from.... maybe they can assist or at least point you in the right direction.
I am a Qualified Technician .I mostly work on the MICS & CICS I dont get to work on the BCM 200/400 .I bought this system becuase the price was right and I wanted to become more familiar
with this.
I was able to in thru the Serial Port got the ip addresses of the lan ports now I am in the only thing I need is the pass word for the call pilot
I will probably have to call the person I bought it from
Thanks for your responses
If you already work on MICS/CP then you probably know how to password reset the CP. Just do the same on the BCM.
Please..no one post the info on the open forum. If you need the info PM me.
All set I did not realize I could go thru the phone
Thanks!