atcomsystems.ca/forum
Posted By: teleco T7406 not registering - 10/30/17 12:28 PM
I have a T7406 that after 2 years became unregistered. I've tried to re register with the default password and the backdoor password, and still getting try again. Any suggestions or time to replace? Thanks.
Posted By: Curlycord Re: T7406 not registering - 10/30/17 12:32 PM
Have you used the dip switches to register?

How many handsets on that base?
Posted By: teleco Re: T7406 not registering - 10/30/17 03:11 PM
yes 1& 2 on 3 off. only 1 handset
Posted By: Curlycord Re: T7406 not registering - 10/30/17 04:16 PM
Are you rebooting the base before registering?
Did you assign a handset ID first such as 1, 2 or 3?

Is there a light on the base unit for the TCM port you are on? I cannot recall if it needs to see digital signal from KSU to register as well.

Your display "Try Again" states to repeat registration process steps from 12 to 23

Posted By: teleco Re: T7406 not registering - 10/30/17 09:08 PM
I'm rebooting the base, I cant assign a port id because the password doesn't work.
Posted By: Curlycord Re: T7406 not registering - 10/30/17 09:14 PM
Well if you do not have a password then you cannot register either.

Any other details we should be aware of?

Are you using the default password?

I will PM you a password you could try.
Posted By: teleco Re: T7406 not registering - 11/01/17 12:03 PM
Did you read my original post?
Posted By: Curlycord Re: T7406 not registering - 11/01/17 12:42 PM
No I did not!

I also do not keep re-reading the original post as it gets bigger.

I also suffer from memory loss at times due to my age and so on.

Instead I was so concentrated on the issue and fixing it for you.

Maybe next time "Per my original post, yes I did but thanks"

Good luck, sorry I wasted my free time on you.




Posted By: Curlycord Re: T7406 not registering - 11/01/17 01:35 PM
Actually I am not sorry, that was too harsh and before I finished my coffee.

If you cannot go into Options with the dealer password to change the handset ID and to change the registration password then battery pull is my only other suggestion.

Posted By: Curlycord Re: T7406 not registering - 11/03/17 12:47 PM
Thanks for the PM teleco.

Have you tried Options then choose number 7. Chg Password then try backdoor password to change the password back to default?
© Sundance Phone System Forums - VOIP & Cloud Phone Help