atcomsystems.ca/forum
Posted By: Droptop Nortel CICS 10 call log - 05/21/20 02:35 PM
It has been several years since I touched programming on a Nortel so I was hoping someone could help me out. We have a CICS with 7.0 software I believe. Recently our area has had to move to 10 digit dialing for local calls. When someone tries to use their call log it will only dial 7 digits and of course the call will not complete. Is there somewhere to change a setting so it will dial 10 digits for all calls in the call log?
Posted By: NTlayoff Re: Nortel CICS 10 call log - 05/21/20 04:31 PM
Sys Prog
Dial Plan
Public Network
Pub DN lengths
Deflt

set to 11
Posted By: Curlycord Re: Nortel CICS 10 call log - 05/21/20 06:56 PM
When looking at the number you can:
-just dial the area code then press dial
-or the dest/pool code such as 9 then the area code and press dial
© Sundance Phone System Forums - VOIP & Cloud Phone Help