Anyone ever experience set relocation and maintenance just disappear from the programming menu? No where to be found. I'm thinking the 6.1 might be corrupt?
That does sound like corruption.
6.1 was flaky off the bat, so they came out with 6.1 MR (Maintenance Release) to fix the bugs.
A Startup most likely would fix it if a reboot didn't.
I hope you do NOT have a PRI on that.
If you are going to do a Startup you might as well go to 7.1
A startup might delete the PRI keycode if you had a PRI.
[A startup might delete the PRI keycode if you had a PRI.] No ands, ifs or buts about it startup will delete the PRI keycode!