atcomsystems.ca/forum
Posted By: Anonymous KX-TD500 - 03/15/04 09:50 AM
Taking over a KX-TD500 install that the previous tech has reset the password to factory defualt. I do not recall what the defualt is?
Do we need special software to program via PC? Last time I worked on a td500 used term emul software. The system will most likely be replace in about 6 months, but a few changes need to be made in the mean time. System was installed around 2000.
Used to be Panasonic certified but moved onto NEC and Mitel 6 years ago.

Thanks

[This message has been edited by matt-tech (edited March 15, 2004).]
© Sundance Phone System Forums - VOIP & Cloud Phone Help