atcomsystems.ca/forum
Posted By: knight Opx Extentions - 08/20/04 11:55 AM
Point to point T1 2 KX-TD 1232 Using CO 27-32 On off site system as "lines" They are Opx Extions From main Site Need To make them ring.

I have a KT-TD 1232 Im putting on opx ext.
have 187 T1 card using Co 25 - 32
I assigned ext numbers 281-287 to co 27 - 32
for Opx

Co 25 and 26 are opx Ext comming from 2nd Cabinet off site.

Any way long story short how do I make ext 281 - 287 ring on incomming call?

Sry for such a shot site setup I'm in a rush. If you need to know more about the setup pls let me know. thnx for your help
Posted By: MrGemini Re: Opx Extentions - 08/20/04 02:23 PM
Knight, you've got mail.
I hope your familiar with programming the
TD 1232s or you may be better off calling in a
Tech.
Good luck, Gem
Posted By: knight Re: Opx Extentions - 08/23/04 08:22 AM
Yep I have those instructions. Called in a Panasonic Dealer who accidently defaulted the system then started swearing and was asked to leave by the customer.

I have the T1's setup and working I can call between the buildings I am just unable to make the OPX ext to ring.
Posted By: MrGemini Re: Opx Extentions - 08/23/04 09:33 AM
[QUOTE]Originally posted by knight:
[Called in a Panasonic Dealer who accidently defaulted the system then started swearing and was asked to leave by the customer."

Make him fix it at his expense. From time to time we all make mistakes, (somebody leave the clear/norm switch in the clear position)?
Knight, I'd actually have to see it but as I recall I believe the ringing assignments would follow that of CO 9.
Use the * as a wild card and for that extension make all the co lines ring.
The Midwest Rep. is based in MI. and I can e mail you his # if you like.
Posted By: knight Re: Opx Extentions - 08/25/04 08:37 AM
I am un able to assign any ringing of any line to the opx Ext.

Im also taking a guess that when you say Co 9 your refering to the reference co setting I have reference CO 01 to Co 27

Co 27 is assigned as my frist opx Ext 281.

I talked to the tech who was out on site and he said that alls he did was change the reference co and the system started ringing

I have setup the Ref. but system is still not ringing on the OPX ext. Im thinking there may have been someother setting that im missing.

Any Ideals? Because Im lost.
Posted By: brokeda Re: Opx Extentions - 08/26/04 06:20 PM
The reference to line 9 is for T1 lines only.
the 8 lines in the main cabinet would still be 1 - 8 as in a regular system.
© Sundance Phone System Forums - VOIP & Cloud Phone Help