atcomsystems.ca/forum
Posted By: dell Kx-ta 624 - 07/15/06 01:34 PM
need to enable caller ID have tested with caller ID box to make sure caller ID is passing through.
Posted By: MrGemini Re: Kx-ta 624 - 07/15/06 03:24 PM
You need to assign the CID to the CO lines that have it in program field 900 and enter the local area code in field 901.
Call log info. is on pages 3-24 through 3-29.
All in the users manual, not the install manual.
You will also need to assign caller ID indication buttons and selection buttons on the sets you want to se to CID. User manual pages 2-7 & 2-8
Do you have your manuals handy?
MrG
Posted By: dell Re: Kx-ta 624 - 07/15/06 06:50 PM
Only have the user manual,I did the 900,901 program
but was unsure og the other fields with the install manual.But you said something
Posted By: dell Re: Kx-ta 624 - 07/15/06 06:51 PM
Only have the user manual,I did the 900,901 program
but was unsure og the other fields with the install manual.
© Sundance Phone System Forums - VOIP & Cloud Phone Help