atcomsystems.ca/forum
Posted By: Yarin Config help with KX-TES824 - 09/05/07 07:48 AM
Hallo all from Czech Republic.

First I must I am sorry about my english.

I have a problem with Panasonic KX-TES824. In my company I have connect two CO-lines and I think about IP-phone. Can this KX-TES824 set up so as for example number 5 go to free CO line ? On free CO line I was have just IP - Phone. Now I am going from extension on CO by direct number 0. Do you understand me ? If I can call on normal pone line, I turn 0, but if I can call over IP phone ( connected on CO3 ), I turn number 5. How I say my central that If i turn number 5 connect on CO3 ? Thank you for anny answer.
Posted By: Carl Navarro Re: Config help with KX-TES824 - 09/05/07 08:54 AM
I barely understand. The C.O. trunks are in groups with access codes. "9" in the U.S. gets you trunk group 1 by default and you specify what trunks are in group 1...in your case 1 & 2.
Trunk 3 is moved to Trunk Group 3 and is accessed by dialing "83" or pressing C.O. 3's button.

Carl
© Sundance Phone System Forums - VOIP & Cloud Phone Help