atcomsystems.ca/forum
Posted By: QCIAthol TDA50 flexible button - 03/20/09 11:02 AM
Hello again,

I am trying to set a flexible button for one touch paging (*3301). It works fine when speakerphone is used, but when the handset is picked up, it defaults to the idle line, as it should.

Is there a way I can program "Int*3301"?

If I try it as a DSS number, it won't accept a "*"

If I try it as a One-Touch, it won't accept an "Int","I", or anything relating to "Intercom"

I have the customer accepting the "Press PAGE, then pick up handset" method for now, at the risk of occasional feedback.

Thanks,

Mike
Posted By: kevhawk13 Re: TDA50 flexible button - 03/20/09 01:18 PM
If idle line preference is enabled, then you're stuck.
Posted By: OBT Re: TDA50 flexible button - 03/23/09 11:56 AM
if you use hot line instead of idle line you could have a second or 2 delay before they dial external number giving them time to press a one touch button to page. only drawback is they have to wait a second or 2 before dialing out.

They can't have everything.....
© Sundance Phone System Forums - VOIP & Cloud Phone Help