Trouble getting DBS MGR 3.10 to configure my modem - 07/16/09 08:04 AM
I've used this program a few times before on another PC. I installed it on a W2K box, but I can't get it to configure my modem. When I try to configure the modem, I get the following message: "Time out error" and on the main window of the DBS manager program it says "Fatal modem error" in red.
I've tried a USR 56K fax modem and 2 USR 33.6 Sportster modems. I've tried rebooting, switching COM ports, and re-installing the program. I've tried playing around with all COM port settings. Right now I have the following settings:
Baud: 1200, 8, 1, None
Flow control: RTS/CTS
Any ideas on getting this to work as I need to perform some remote maintenance. Thanks...
I was able to dial into a Norstar so I know it isn't the modems or a driver issue...
Jason
I've tried a USR 56K fax modem and 2 USR 33.6 Sportster modems. I've tried rebooting, switching COM ports, and re-installing the program. I've tried playing around with all COM port settings. Right now I have the following settings:
Baud: 1200, 8, 1, None
Flow control: RTS/CTS
Any ideas on getting this to work as I need to perform some remote maintenance. Thanks...
I was able to dial into a Norstar so I know it isn't the modems or a driver issue...
Jason