atcomsystems.ca/forum
Posted By: Toner TDE100 w/ SIP Trunk - 04/20/11 08:22 AM
Hey All,

I'm setting up a TDE100 with a SIP trunk for the first time (I've done many SIP trunks before, just not on Panasonic!)

I can make outgoing calls, but the call cuts off after 100 seconds or so. Has anyone set one of these up with a SIP provider that doesn't do registrations?

Any gotchas?

Thanks!
Posted By: Toner Re: TDE100 w/ SIP Trunk - 04/21/11 07:57 AM
Well, the problem turned out to be the router. (one of those 2wire units).

Replaced with a Linksys and all is OK.
Posted By: Toner Re: TDE100 w/ SIP Trunk - 04/28/11 08:00 AM
Also, I had assumed that the 2 LAN ports on the processor represented the 2 IP addresses in programming. Turns out both IP addy's are on both LAN ports - do not plug them into the same switch!
Posted By: AjitPal Singh Re: TDE100 w/ SIP Trunk - 04/28/11 10:16 AM
Hi I am trying to set up the TDE 100 sip turnks. would you be able to post a screenshot of the Ports. mine stays on fault and i am trying to integrate it with SAP BCM.
© Sundance Phone System Forums - VOIP & Cloud Phone Help