I'm actually a Samsung tech, but bought a Panasonic KX-TD816SA that was replace by a Samsung. I have now installed it at my home office. I have downloaded a manual and I am able to access the programming area.

The issue I'm having is terminology. Under which heading do I go look for trunk ring assignment? Right now it is ok for all the phones to ring at the same time, but later on I'd rather just have the switchboard ringing.

Not asking for codes, merely under which heading to look.

Thanks in advance,

Program 603 day and 604 night this is done by jack and co. You can program all co at once using * when asked for co use # * for jack and it will program all extensions at once. Or # and jack number to do them one by one. You can set to ring straight away as default or delay ring, no ring will set it to just flash on the phone

Thank you,

Much appreciated.