atcomsystems.ca/forum
Posted By: sirmasa KX-TD1232 US model in Europe? - 07/25/11 01:21 PM
hello all forum members,
i have a panasonic KX-TD1232 (US domestic model). i would like to bring this unit to use it initaly since i already own it and know that it works. i understand that there is a european model, the KX-TD1232CE, but i am unclear on the differences and if those differences will make it impossible for my domestic model to work there.

the sticker on the bottom of the unit lists the power supply rating as 120v 60hz. does anyone know if this US unit can accept 50hz? more specifically, in italy, could i plug this unit into a 220v-110v step down transformer then plug the transformer into the wall (where power is 220v/50hz)?

someone also suggested that the ringer voltage in europe is around 60v whereas the ringer voltage in the US is 48v. is the difference in voltage something that could hurt the TD1232? my plan is to use US telephones as the extensions for this system, if that makes any difference.

many thanks in advance!
Posted By: ShawnC Re: KX-TD1232 US model in Europe? - 07/25/11 01:51 PM
You can use a stepdown transformer as long as its wattage rating is 20 percent higher than the rating on the panasonic and voltage is converted to 60hz it should work fine on loop start co lines hook it up whats the worst thing that will happen you need ring caps on the lines or ring boosters btw it negative -48 volts dc line voltage and 90-105 50/60 volts ac ring voltage pretty much everywhere now
you also should be aware panasonics co loop current on your co lines need to be between 25-35 milliamps!
=
Posted By: sirmasa Re: KX-TD1232 US model in Europe? - 07/25/11 02:00 PM
thanks for the quick response!
so based on what you are saying, i would need at least a 200 watt step down transformer (for a +20% pad over the 140watts the unit claims it wants).

in terms of the ring voltage, is this something that i would need to plan ahead for? could i damage anything on the unit because of a ring voltage difference? if so, i'd be a little nervous about flying over with the unit and step down transformer, plug it in and have resistors (or whatever else) fry out. i'm really new to PBX systems and would love to be sure of what i've got and what i can do before i fly over to italy.

thanks!
Posted By: ShawnC Re: KX-TD1232 US model in Europe? - 07/25/11 03:58 PM
https://www.expatsinitaly.com/node/109
read this its says that usa phones do not work in Italy if a 2500 set wont work on their network the td1232 wont so i'dd forget it and go through the proper chanels there since you dont know enough about pbx systems
Posted By: ShawnC Re: KX-TD1232 US model in Europe? - 07/25/11 04:47 PM
you could order one of these
https://www.multitel.co.uk/italy.jpg
and ship it and a cheap radio shack phone over ahead of time to see if its true i am starting to believe that they will why would they make a 3 prong to rj11c if it didn't!
Posted By: sirmasa Re: KX-TD1232 US model in Europe? - 07/25/11 05:00 PM
good points. things that make me go "hmmm." i am looking into pricing on a similar unit (if not the same one) that is specific to the european market from vendors in italy. i would hate to end up paying a premium for a local system and then later find that the one i already own would have worked. (i have a whole shipment of office gear heading to italy, so shipping costs are minimal and import duties should be minimal seeing as the system really isn't worth much) though, i would hate to schlep this thing halfway across the globe just to plug it in and see it fizzle like a sparkler.

i do appreciate you help. it led me to call panasonic support, who in turn pointed me to a local dealer who has been looking more into this for me. i am seeing if they could possibly sell me the correct european model here in the states.

thanks again.
Posted By: Lightning horse Re: KX-TD1232 US model in Europe? - 07/26/11 05:59 AM
I'm betting that by the time you pay import duties on the Euro system into the U.S. and THEN pay import duties into Italy (of course they'll charge duties, they're DESPERATE for $$$), you'll have as much, or more, tied up in it than buying it in Italy. And it will STILL just be in a box. And the tarriffs/laws in Italy will probably get you jailed if you DIY!
Posted By: ShawnC Re: KX-TD1232 US model in Europe? - 07/26/11 08:13 AM
Hey I agree with you L!That raises another thing about tarrifs that ksu has North American reg & ren numbers on it!
Posted By: ShawnC Re: KX-TD1232 US model in Europe? - 07/26/11 08:17 AM
https://www.wint.it/com/

Contact these guys I will bet they have a used TD system!
Posted By: sirmasa Re: KX-TD1232 US model in Europe? - 07/26/11 09:32 AM
thanks for the link to wint.it, i just put in a request with them to see if they have any of these units for sale. again, thanks to all for the tips and insight.
© Sundance Business VOIP Telephone Help