atcomsystems.ca/forum
Posted By: macjax Card type for TDA50 - 06/17/14 04:11 AM
Hi All,

I have a TDA50 and came across some KX-T7731 Phones and 2 KX-TD7896 cell stations that I would like to add to my system. Problem is the current config only supports a total of 4 of these. What card type(s) will I need to make all this work?

Thanks !!!
Mike
Posted By: brokeda Re: Card type for TDA50 - 06/17/14 04:41 AM
For each of those phones you need a DHLC or PLC card.
Limit is 4 with one AC adapter.'

Limit is 24 with 2 AC adapters.

Look at your manual for power specs.
Posted By: Carl Navarro Re: Card type for TDA50 - 06/17/14 04:51 AM
Besides the 2nd power supply, you'll need either a TDA-5170,75 or 76. They are respectively an HLC4, PLC4, or PLC8.

Carl
Posted By: Otoni79 Re: Card type for TDA50 - 06/23/14 10:18 AM
I just set up the same with a KX-TDA50 in Wisconsin - Remote programming. You will need additional PSU as stated above. Also note that DLC will not work with HLC in the same system - KX-TDA50
© Sundance Phone System Forums - VOIP & Cloud Phone Help