I hardly ever see an 824 any more but I've got two small things to adjust.

CO 1 shows no caller ID but CO2 and CO3 are fine. If I swap line one and two, the Caller ID for line one comes in just fine for line one in the line two position so I know that works.

What program turns on Caller ID for CO1? I've gone through the obtuse manual and I can't find it.

And, how do you set the rings during the daytime before calls go to voicemail, system is set for two few rings.

Thank you so much, Bracha

look in the 900 settings. 900 enables it per co,

fwd timer is 202

Thank you so much for helping an old gal out.

please guy, i installed TA628 with caller ID card so as to view my external caller id number. i did the programing on 628 and 900 codes but still not displayed the incoming number. please what other programing should i do on it.
i need to see the in corming telephone number on my console box.
i have TA628pbx, caller id card, console.