atcomsystems.ca/forum
Posted By: Not_sirius FAX OFF PRI - 03/17/23 12:36 AM
They have a TDA200 using a PRI..

They always kept an analog line for their alarm system and we shared the FAX for it

They are now going to a cellular alarm and want to port their FAX to the PRI.

I see where to put the incoming number In the DID pool to DIL to a Separate Ring group to send it to the analog port assigned to the FAX machine.

Where I’m stuck is how do I get away from dialing 9 before each outbound FAX call and to get it to outbound CID correctly?

I’ve never tried this before on a PRI and want to show up with a plan that doesn’t have to modified onsite.

Thank you in advance!
Posted By: C5Z Re: FAX OFF PRI - 03/17/23 12:50 AM
If you go into 4.1.1 tab "Option 2" select "Pickup Dial Set" and set to ON. The next column over, set "Pick up Dial No." to 9
On the ISDN Clip tab add the new fax number to that extension.
In 2.3 set "Hotline Dial timer" to 0 or 1 second.
Kevin
Posted By: Not_sirius Re: FAX OFF PRI - 03/17/23 01:30 AM
Thanks Kevin!

As usual I was looking in the wrong places.

.
© Sundance Phone System Forums - VOIP & Cloud Phone Help