|
|
Joined: Jun 2012
Posts: 3
Member
|
OP
Member
Joined: Jun 2012
Posts: 3 |
Recently switched from AT&T to comcast business class phone service at motel. Currently the system is setup for groundstart and needs to be reprogrammed for loopstart. Now the issue at hand is the system is not allowing to be changed to programming mode. There is no response when used with the default security passcode holding down status key. Nor does it work if you close status switch one and dial 70 or pound from the console itself. This has been attempted several times with no luck. Any information would be greatly appreciated cause 4 hours on the phone with tech support still resulted in a phone system that can not make outgoing calls
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,307
Posts638,895
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
106
guests, and
160
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|