|
|
Joined: May 2005
Posts: 17
Member
|
OP
Member
Joined: May 2005
Posts: 17 |
O.K. we'll definitely do the upgrade, but is there an order to putting the cards in? We currently have a 2 -port fiber module in the second leftmost slot and I attempted to put a 6-port combo card into the leftmost slot and when I brought the system back up it says there was a wrong conifguration. I had to remove the card to get the system back up. In the two right most full slots there are Trunk cards, and then in the other box (connected with a fiber cable) I have two more trunk models and one blank spot on the rightmost slot. If I have to move these around won't I have to rewire where my phone lines are coming in at? Also I would like to get the T1 card in and set it up before we move to the PRI, but can I do that and keep using the trunk modules until then ?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,297
Posts638,867
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (justbill),
84
guests, and
300
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|