Well... I must have missed something. I went to the receptionest phone (x10) and keyed in the sequence as listed, but nothing happened and the Add-on mod #2, button #4 doesn't work. I did this procedure with the receiver on-hook and no lines/buttons selected first. I did verify that x32 is phys and logical port 022.
Here's added info: The system is a Strata DK424, main KSU is a model DKSUB424A, expansion cab is model DKSUE280A. Contact VM card is in the main cab in PCB slot S14.
DADM2020 add-on mod #1 has buttons 1-20 programmed for sequential ext's 11-30. Add-on module #2 has buttons 1-3 programmed for ext's 33, 34, and 35. No other buttons on Add-on mod #2 are programmed. I noted that one reply stated something about buttons being sequential once the first button on the add-on mod is programmed. Is this what is keeping me from programming add-on mod #2 button #4 for ext 32?
Any added suggestions would be greatly appreciated. Thanks.
Dan, Phx
[This message has been edited by Bass Man (edited September 14, 2005).]
