Originally posted by justbill:
I'm moving this to the T-1 category. Majestic, just remember one thing, the timing source can't cause slips, that should help you trouble shoot your problem. I'm not real good at T3 so I'll let anthony deal with that part. You have a timing option set wrong somewhere, that is the only thing that will cause pure slips.
Bill’s right, ONE GOOD timing source can’t cause slips.
BUT… One BAD (or going bad) timing source can cause slips.
Also, TWO or more good timing source trying to control the timing of a circuit can cause slips.
Hopefully that’s already understood… I’m pretty much out of ideas on this one… :rolleyes: Well, good ideas anyway.
