Powered up an ADIX system laying around to use. System has one CPU/HW card in slot 1, not the CPU slot (CPU Card has short slot, not long slot). Also has two 408 cards, a VMAC card, and a 8PSUB card.
When I started programming it, I noticed every port was configured for a virtual KT. So I switched it to ADIX KT, punched down port 1 with a 12KTD and it came right up. Also punched down CO 1.
LCD displays correctly when access Line 1 from the template, and shows line 1 on LCD, however, I have no audio on the IX-12KTD-2.
When I pick up ICM, and call another extension, all displays well, yet no audio. Via SPKR or via Handset.
Have changed polarity on jack, and ironically the phone worked the same. Know for sure the 12KTD works on another system perfectly. Have even punched down a diff 12KTD to port 2 with same results.
I can even hear the relay on the 408 when I press a line button.
Have gone thru all classes and can't figure out what's programmed wrong.
Any ideas?
Thanks,
CadJoe
