|
|
Joined: Apr 2006
Posts: 29
Member
|
OP
Member
Joined: Apr 2006
Posts: 29 |
I have a Partner ACS Im trying to ring line 3 thru existing overhead paging system after hours. Problem is it(the ACS) replaced a Merlin plus with Merlin SAA triggering a Bell Systems relay and external tone generator to create the Paging ring tone after hours for line 3. The electrician put an after hours toggle switch upstairs on the feed diverting signals back downstairs thru the relay to accomplish this somehow. They also have an Employee break timer and a septic tank alarm going thru the same amp/set-up. How do I eliminate the SAA and accomplish the same thing thru the ACS? It is a Avaya Partner ACS R6 with 13 phones and Partner Mesaging. I thought I could put the wire plugged into the SAA alert directly into extention 22 on the ACS phone system and have line 3 ring only ext 22 in night service mode. I blew out the extention port and am now baffled. Help.
|
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
128
guests, and
304
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|