DX120, PRI, display "no loop current."|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

DX120, PRI, display "no loop current." #553513 06/14/13 02:00 PM
Joined: Feb 2007 Posts: 902 Overland Park, Kansas Deltron OP Retired Moderator
OP Deltron Retired Moderator Joined: Feb 2007 Posts: 902 Overland Park, Kansas	How in the world can a PRI display "no loop current" in a DX120? All calls are operating correctly both ways, D-channel has no errors, nothing. It's been running for 5 or 6 years and just started. It clears up on a reset but comes back. Any ideas?

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
DX120, PRI, display "no loop current."	Deltron	06/14/13 06:00 PM
Re: DX120, PRI, display "no loop current."	EV607797	06/14/13 06:46 PM
Re: DX120, PRI, display "no loop current."	JWRacedog	06/14/13 08:26 PM
Re: DX120, PRI, display "no loop current."	RATHER BE FISHING	06/14/13 10:44 PM
Re: DX120, PRI, display "no loop current."	Deltron	06/15/13 12:40 AM
Re: DX120, PRI, display "no loop current."	5years&counting	06/15/13 06:37 AM

Moderated by 5years&counting, jwooten, RATHER BE FISHING

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems DX120, PRI, display "no loop current."