There is no reason why you couldn't have a 25 pair feed tail with a female amp connector coming from the KSU to the first 25 pair block, such as 66A25 or 66B25 and have, as the first connection to the block a 25 pair cable terminated to a male amp connector. This will facilitate being able to quickly change out the KSU for another. You can also use M blocks with a built in 25 pair amp connector on it, but that kind of makes an additional point of connection that is unnecessary. The method Arthur described is an excellent method of building a good, serviceable key system cross connect field.
Rcaman
Last edited by Rcaman; 04/08/14 09:20 AM.
