Hello Everyone,

First i like to apologize for the noob questions and thank anyone who can help me out.
I am a systems administrator very good with networks, windows, vmware and so on but a total noob when it comes to telecommunication systems.

Ok so what i would like to do is link our Lync server with our 7200S. The idea is for users to make calls to the outside and users from the outside to dial in to lync conferences.

So far i have got one MGI license and one SIP License, i manage to get the system to works as follows:

Users can only call full DID numbers and if they ring outside number it goes to reception.
Now i understand i need to do something with the DID table to direct to outside but i have no idea how to do that, on our normal phone we just dial 9 to reach the outside i am assuming it's going out of the Tepri card?

Could you guy's help this noob on how to direct the DID and how i can direct the coming in calls to let's say number 801429 to go to the Lync server.

I am also assuming i have to add the lync server as sip carrier but everything i do doesn't work.

Bellow are the cards and a sample from the did table.

Regards,
Luben


1 x 8DLI
2 x MWSLI
1 x TEPRI (PRI/E1)
1 x MP20S (MP-MGI)

2*** B B B B B B 0 99 No
3*** B B B B B B 0 99 No
5*** B B B B B B 0 99 No
793335 5001 5002 201 IGroup 0 99 No
801400 203 203 DDI 0 99 No
801417 5005 5005 Support 0 99 No
801429 213 213 DDI 0 99 No
8*** B B B B B B 0 99 No