that did work. thank you. one more question. if adding an exp cab after system is running, is the only programing to get the base staion to recodnize it, the sta card programs. thanks again. dave
Pretty much, unless you want to throw switch 4 and reprogram it all again. If you are asking about programming from a phone as opposed to a a computer, it can be done but it is a lot easier to "see" what needs to be done, that being said, Paul my class instructor provided instructions to add an Expansion KSU using the phone.
Log into Phone Admin on a 24 Button Station with Admin capability (Station 100 by default) by pressing Trans/PGM *#. If the database is password protected enter the password. When the display reports “Admin Program Start” complete the following.
A.
Program the Slot
Press PGM and Dial 101 (Board Assignment – Enter Slot Number)
Dial 07 (Slot 7 F1:ID F2:DEVS – ID:UNKNOWN DEVS:0)
Press Flex Button 1
Dial (Card Code) 33 (Slot 7 F1:ID F2:DEVS - ID:LCOB3 DEVS:3)
Save
Press Back (Board Assignment – Enter Slot Number)
Dial 03 (Slot 3 F1:ID F2:DEVS – ID:UNKNOWN DEVS:0)
Press Flex Button 1
Dial (Card Code) 22 (Slot 3 F1:ID F2:DEVS - ID:DTIB16 DEVS:16)
Save
B.
Program the Logical Numbering Assignment
Press PGM and Dial 103 (Logical Slot Assign – COL STA VMIM)
Press Flex Button 1 (COL) (05 06 .. .. .. .. ..)
Dial 050607 (05 06 07 .. .. .. ..)
Save
Press Flex Button 2 (STA) (01 02 .. .. .. .. ..)
Dial 010203 (01 02 03 .. .. .. ..)
Save
C.
Reset KSU
Card Codes
Hybrid (8 Station) 17 LCOB3 (3 Analog CO) 33
DTIB 16 (16 Station) 22 T1 (T1IB 24) 50
VOIB (4 Channel) 41 PRI ( PRIB 24) 31
VMIU (VMIB) 64
