|
|
Joined: Dec 2008
Posts: 280
Member
|
Member
Joined: Dec 2008
Posts: 280 |
Correct go to Ctrl-C then Q for Pri Parameters At the bottom you will see the switch type: 01 – AT&T Custom 02 – National NI–2 03 – DMS–100
5E is AT&T Custom I do believe. To change just hit enter until you are down there and the I - D key changes value. And remember this:
Parameters for the PRI circuit are programmed on the PRI Parameters screen. This screen requires password level 8 for access. Changes made on this screen do not take effect until the PRI card is reset.
mjc
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,296
Posts638,847
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (ALB300),
141
guests, and
265
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|