|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
OP
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
how do the switchs need to be set to program with a console plugged into the maintance port on the front of the cabinet ?
I put the system in years ago but the customers guy has been doing the programing just calling me in for advice .
well he had a heart attck his assistant has never programed the switch and I cant remeber the settings .
do we take the main console off line ?, I remeber something about that but its a bit foggy
been going thru the manuals but not finding it .
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2002
Posts: 632
Member
|
|
Member
Joined: Nov 2002
Posts: 632 |
If memory serves me right, I beleive the thumbwheel switches are set to 7770 ,and their was a toggle switch by the maint console amphenol on the switch , It's been a long time and my documentation grew legs.
|
|
|
|
|
Joined: Jun 2005
Posts: 370
Member
|
|
Member
Joined: Jun 2005
Posts: 370 |
7770 sounds right. Let me know and I can look it up. Don't think you need to use the transfer switch.
Do the job right the first time.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
7770 is correct for the maintenance console. Press lamp test and you're in programming. Hope you have an overlay. The main console does not need to go offline.
|
|
|
|
|
Joined: Oct 2004
Posts: 64
Member
|
|
Member
Joined: Oct 2004
Posts: 64 |
If you have not been maintaining the system, I highly suggest that you get a copy of the settings prior to doing anything. I think I remember 55590 will send the entire database information to the serial port. Also if there is an attendant guide it should have all of the 555 (print) codes in it. If the programmers access code has been changed you can also obtain it from the system info. I do not believe I am allowed to post what the default is but it is 4 keys to enter programming. And I also hope you have the overlays for the console.
[This message has been edited by QOS (edited August 07, 2005).]
[This message has been edited by QOS (edited August 07, 2005).]
|
|
|
|
Forums84
Topics94,305
Posts638,892
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
122
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
