<font face="Verdana, Arial" size="2">Originally posted by dtmf: If it's a Onyx3 or 4 you can't. If it's a VS then you can. I believe you said you have an Onyx3 so you can't program from a phone. He wanted to make sure it was Onyx3 and not a VS. You are correct,powering down will not lose any programming.</font>
I can program speed dials from x300. Does this mean its a VS?
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
No that doesn't mean that it is a VS that means that 300 is in charge of speed dial programming for the system. If you cant get in by dialling #775312# then its got to be a Onyx3 or 4
Russ runs a local service and private tech center.
<font face="Verdana, Arial" size="2">Originally posted by dtmf: No that doesn't mean that it is a VS that means that 300 is in charge of speed dial programming for the system. If you cant get in by dialling #775312# then its got to be a Onyx3 or 4</font>
I tried onyxvsh and onyxvsk and no luck i'm beginning to wonder if there is any valid passwords... do i just pick up x300, press intercom and dial that sequence to try to enter programming?
<font face="Verdana, Arial" size="2">Originally posted by dtmf: You can give it a shot, If it works you will see the lights change and your display will tell you that you are in System Program</font>
Okay I tried it and it went into speed dial programming so i'm guessing you can't program my system from x300
you absolutely cannot program the system from ext. 300. you have to hook up to the com/mem card that has the rs-232 plugs on it. upload a session of hyperlink, at i think default value is 2400 baud. then type in onyxvsh or onyxvsk.
<font face="Verdana, Arial" size="2">Originally posted by husker244: you absolutely cannot program the system from ext. 300. you have to hook up to the com/mem card that has the rs-232 plugs on it. upload a session of hyperlink, at i think default value is 2400 baud. then type in onyxvsh or onyxvsk.</font>
Okay.. my problem is that I have the AUX module hooked up and i have the level 1 password but nobody knows who has the level 2 password... that's how i got into this mess in the first place
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
[/url] ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/forum/frown.gif)
i'm beginning to wonder if there is any valid passwords... do i just pick up x300, press intercom and dial that sequence to try to enter programming?