|
|
Joined: Jan 2006
Posts: 72
Member
|
OP
Member
Joined: Jan 2006
Posts: 72 |
MICS 6.1
when the phone rings the display shows 'line 1 calling'. when you answer you see the caller ID.
How do you program the ID to show during the ring?
-dan
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Jun 2005
Posts: 2,256
Member
|
Member
Joined: Jun 2005
Posts: 2,256 |
Caller ID is set in a couple of places in Terminals & sets. It's on a per line/per extension basis. Take a look at the documentation for the MICS. It will have your answer.
|
|
|
|
Joined: May 2008
Posts: 34
Member
|
Member
Joined: May 2008
Posts: 34 |
Caller Id set allows you to specify if a telephone displays the Call Display information when a call is ringing on an external line(After the call is answered,Call Display information is allways shown at the telephone that answered the call).The Caller ID set for target lines is the same set that has apperance on that target line.Press CHANGE to select the setting.
Of course the telephone must be a ringing set,also while the set is ringing try the feature code for Caller ID to see if you are getting the translation from the carrier.
Good luck
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
Telco Features is giving you ability to choose seting for CID: (Name or Number first), CID(Y or N), Line CID Y or N for Target Line.
|
|
|
Forums84
Topics94,290
Posts638,803
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, SamsungCat),
111
guests, and
422
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|