|
|
|
|
Joined: Sep 2008
Posts: 26
Member
|
OP
Member
Joined: Sep 2008
Posts: 26 |
Hey Guys,
I never do any of our cabling when we do our phone installs, however, I have to do the cross connecting and all because my cabling guy is out sick.
We have 3 66 blocks and I apparently did everything correct. All of my extensions are working and all of my phone lines appear and dial out in the correct order. Same goes for them coming in properly.
However, I have a CP100 that I am trying to get connected up. It has a rj-11 on both ends and there are two. I read to punch them down on the last two pair where the extensions are as the last two extensions. So, I spliced the cable and connected the red and green cables to what would be extension 36 and 37.
When I power up the CP100 the two port lights turn on. Then they shut off for a few seconds. Then they blink for a little while then they turn off. None of the lights ever come back on after that.
No way to activate it or verify feature codes.
Based on what I described, any ideas?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Sep 2008
Posts: 26
Member
|
|
OP
Member
Joined: Sep 2008
Posts: 26 |
Sorry -
CICS 7.1
CP100 - 5.0
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
Ext 37?? Should just be 21 to 36....... Use 35 amd 36.... Port 117 is the ATA port.....
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
Forums84
Topics94,291
Posts638,806
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (teleco, Toner),
140
guests, and
402
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
