atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems KX-T30810 Programming Toll Restrictions

you should not have to reset!
Did you put phones in trs class 3

yes. I put the phones in COS 3. Re-checked later. Programming saved. Testing the phones there was no change, though. Could dial anywhere.

System is marked as revision 3.

So I need 7 digits instead of 3 digits for code 11. Anybody know how I can implement 911 on a restricted phone?

add 911 to toll exeption code 12
Did you get the added features list?

Its been a while but I think you need this

code 10 set restricted stations to class 2
code 11 deny all numbers
example 0******
1******
2******
etc.

code 12 add allowed numbers
example 911****
1800***

Thanks Metelcom! Now I see the light!

Thanks again Metelcom, it worked perfect!
Program time 5 minutes, the way it should be.

Hello!Is the first time in this NG. I'm sorry for my english but i'm italian..
I've a phone KX-T30830 with a EASA PHONE 308. after a black out, my problem is that every call that arrive make start the fax...I've 3 lines and just one should make the fax start.
can someone help me?

thanks

Apparently the system defaulted or the programing is scrambled due to the power failure.

Which means the lines are now all programmed to ring on the station port the fax is on.

If you are comfortable with programming your system and you have an installers manual reprogram the lines to ring at the desired station(s).

Due to the fact the programing changed after a power failure indicates to me that the internal battery is not keeping the data base stored so I would recommend that you call a technician to replace the battery if it can be replaced and let them reprogram the system while they are there.

Also it is possible you have more problems due to the power failure that you have not noticed yet and the technician may save you a lot of headaches in the future by checking the data base.

filippop Welcome to the forum next time you have a question please start a new thread as this problem has been solved so many techs will not read this to help you. As Bobby said your backup battery has failed. You need to have the battery replaced (part# P-01H-F2G1) and your database reprogrammed