atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems KX-T7433 second phone

Then the pair of wires to the centre pins of the telephone socket that the 7433 is pluged in to are not terminated at the telephone system for the cordless to work. the 7433 will work fine without them but the cordless has to have the analouge port connect through to the socket.

Whoooow!!! Now I think I understand. To connect the analogue port I have to go at MDF and fix that 2 center wires. Is that simple? Do you think I can do it?

I don't know, for it to work you have to find the pair of wires to that socket at the system and connect it to the correct pins of the MDF.

Connecting it to the wrong pins or causing a short could blow 4 extensions, because the power regulater runs 4 ports, and if it goes then thats 4 extensions dead.

You also will need the correct tools to punch down the wires and to find the correct pair.

If the cordless is working in a other port just call forward your extension to it when you leave

code 7102 ext no

So I try to make that but ......is not working.
I make 7102 than the extension but the extension is made 3 digits and in programing it must dial 4 digits.

Use the fwd button 2 or 7102+ extension number you may have to enter # after extension number

After I dial # it sad is not valid. If the extension is 121 I dial 7102+(0 or 1 or 2)+ extension it sad FWD(ALL) Ext121 but when I call myself from outside yhe system is not forwarding my call.

PUIU. do you have a panasonic kxtd 816 or 1232?

The code for forward is for the uk model and may differ to the romania unit, if it is not working check your user guide

On my unit is writen D1231.
I downloaded user manual and it sad tha same but is not working or I don't understand it. I will search more......
Regards.
PUIU

the outside lines have to be programmed to ring dil 1:1 to your extension to follow a forward, so they would only ring at your phone.

I think you should get someone in to set up the system to do what you want. there is no quick fix
get the analouge port connected to your phone or get the cordless programmed to ring for incoming calls.

I understand..... I should get some technical help.
Thanks for all!!!