|
|
Joined: Jan 2009
Posts: 94
Member
|
OP
Member
Joined: Jan 2009
Posts: 94 |
Okay so its been a while since i've done a TDA system. In the past I bought my clients the system via a local dealer so he naturally got it all setup for us, and the last time I did a system was about 2 years ago, a TDA100 in my own office.
Well obviously they made some changes and the TDA50G is what they sell now... so I bought that from a local distributor of mine (they sold it to me direct after i gave them my BTS dealer number).... so now i have this here and im not quite sure where to get the TDA50G software. I log into my BTS account but all i see is the unified console stuff and the SD card (5.0) files.... what happened to the maintenance console? Do they not use it anymore??? A little help is appreciated here.
Also, do i need to active the TDA50G to use it like i used to with the TDA100? (the person i bought it from activiated it for me, but in this case, i purchased the TDA50G direct from my distributor this time, not through a panasonic dealer, my distributor is authorized to sell me this product line, just not the TDE)
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
you have to download the new unified manintenance console software. The old stuff is gone from the site.
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Jan 2009
Posts: 94
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 94 |
Yeah got it. I wrote that as I downloaded it. I see its built into that stuff now... now i just need access to the flash rom registration... guess i gotta call panacare or whoever they are now.
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
If you have a valid dealer & tech ID's you can register it on the panacare web portal
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Jan 2009
Posts: 94
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 94 |
I cant login to panacare. I can login to BTS, no problems... but i don't have a pancare login/pass.. i tried my dealer ID and my tech id (which is basically the 5 digit then the 4 digit number) but it doesnt work...
|
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
|
Member
Joined: Aug 2009
Posts: 1,116 |
do you have tech certificates for the tda,tde , ncp
TVA ,unified console ,Networking concepts & tda50G
I just followed the links and was to the point were I could reg systems....
You should Know Who your ASM is it would most likely be my guy....
|
|
|
|
|
Joined: Jan 2009
Posts: 94
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 94 |
Whats ASM??? I have certs for the following:
TDA50G
IP Networking Concepts
IP Product Webinar
Unified PC Maintenance Console Webinar
I don't know how to login to that panacare site though... like i said, i tried my BTS dealer # and then the tech id (when i login to bts i use a 9 digit number, which i think is my dealer ID and tech id?)
|
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
|
Member
Joined: Aug 2009
Posts: 1,116 |
Your ASM is your Panasonic Sales Rep you would call
him and tell Him that your dealer and tech id won't let you on to reg your system...
Yours is most likely Dave Slowick he is the north east rep!!
|
|
|
|
|
Joined: May 2008
Posts: 144
Member
|
|
Member
Joined: May 2008
Posts: 144 |
So... if you don't have a tech, how could one obtain the unified software?
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
Your tech ID is four digits. On the panacare site you put your dealer id and your tech id in seperate fields, not one long number. If you have the certs you say you do then you should have dealer & tech id's
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
|
Member
Joined: Aug 2009
Posts: 1,116 |
Rob read his post carefully he has a dealer id and tech number and gets as far as the dealer site but can not log on the the reg area...!
|
|
|
|
|
Joined: Jan 2008
Posts: 227
Member
|
|
Member
Joined: Jan 2008
Posts: 227 |
Originally posted by robc:
So... if you don't have a tech, how could one obtain the unified software? All you need is a dealer id and a password to log on to the BTS site. From there you can download software, but the panacare site asks for dealer id & tech id. No techy no washy
Tele-Net Technologies
Certified Panasonic dealer
|
|
|
|
|
Joined: May 2008
Posts: 144
Member
|
|
Member
Joined: May 2008
Posts: 144 |
I'm just an end user. Wanted to see if I can use Win7 to admin my 824, but thanks for the info!
|
|
|
|
|
Joined: Jul 2006
Posts: 2,719 Likes: 11
Admin
|
|
Admin
Joined: Jul 2006
Posts: 2,719 Likes: 11 |
Rob, how did this get off topic? Your TA-824 is an unprotected product. I have the MC on my Vista box, so I guess you might be able to run it in compatability mode. I'm pretty sure my craptop talked to an 824. I specifically bought an XP box as my work machine after Vista couldn't run Nortel BCM software and I'm never going to worry about it again.
There are 13 digits that matter to Pana for TDA registration, Dealer ID, Tech ID, and Dealership ID.
Carl
|
|
|
|
|
Joined: Jan 2009
Posts: 94
Member
|
|
OP
Member
Joined: Jan 2009
Posts: 94 |
Daves name does ring a bell, I think i get automated emails from him, lol. I'll contact him and get it squared away. Yeah no probs using BTS dealer, and i do have the certs, never could access the panacare site as we never had to (we always bought TDA from another dealer, but we became one recently)... soooo i'll go find his contact info and see if he can help me. Thanks for the info.
|
|
|
|
|
Joined: Feb 2012
Posts: 3
Member
|
|
Member
Joined: Feb 2012
Posts: 3 |
Hi
I am having problem with my maintanance console. I have the UPMC v7 R1 but cannot connect to the PBX nor open the DMSYS file. The PBX is in a boat and from the states. Is there a US version of the maintenance console? Anyone here can share it to me. many thanks
|
|
|
|
|
Joined: Sep 2005
Posts: 9,285 Likes: 6
Admin
|
|
Admin
Joined: Sep 2005
Posts: 9,285 Likes: 6 |
Breneer
Please post this question in a new thread. This thread ended back in 2010 so you won't get many answers if it's not seen.
|
|
|
|
|
Joined: Jun 2012
Posts: 61
Member
|
|
Member
Joined: Jun 2012
Posts: 61 |
You need a UPCMCv7 US .
That is a version meant for the USA
UPCMCv7.1.1.4 US
|
|
|
|
|
Joined: Aug 2009
Posts: 1,116
Member
|
|
Member
Joined: Aug 2009
Posts: 1,116 |
|
|
|
|
|
Joined: Jun 2012
Posts: 61
Member
|
|
Member
Joined: Jun 2012
Posts: 61 |
7.2.1.0 US version would work for him.There are two version of 7.2.1.0,one meant for the USA (UPCMCv7.2.1.0)and the other ...
He just has to get the right version.
Even UPCMCv5.1.2.3 US will do.
Try Ask.com for opinions,tek-tips e.t.c
|
|
|
|
Forums84
Topics94,300
Posts638,879
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Bull Tone),
175
guests, and
413
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
