|
|
Joined: Apr 2003
Posts: 5
Member
|
OP
Member
Joined: Apr 2003
Posts: 5 |
Hello folks,
We have a Triad -S with an external feedback eleminator. The paging feature pages all the phones first, the pages the external speakers in the plant. By the time it runs through all the speakers, it has been 60 seconds and it is ringing back to the attendant. I would like to change this delay to 120 seconds to give time for someone who in out on the production floor time to get to a phone before it calls back to the attendant. How would I do this?
Thanks,
Jason Grider
IT Manager
Capitol Vial
Auburn, AL
[This message has been edited by Honig (edited April 04, 2003).]
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Moderator-Allworx, Nisuko-Tie, Vodavi
|
|
Moderator-Allworx, Nisuko-Tie, Vodavi
Joined: Mar 2001
Posts: 3,268 |
Hold recall is defaulted at 60 sec.
Park recall is defaulted at 180 sec.
Do you feel comfortable in programming the Hold recall time. It can be set to 300 sec if you want. Let me know
|
|
|
|
|
Joined: Dec 2001
Posts: 352
Member
|
|
Member
Joined: Dec 2001
Posts: 352 |
JW is right about the timer values. You can also shut off the timer value so there is no ringback. It isn't wise to do because the call would never ringback and they would have to hang up and call back in.
Why do you do two different pages? Why don't you do an All Call page (both internal and external)? This would cut the page time in half by only paging once instead of twice.
Or am I not understanding the question?
Tip and ring, the work of the devil!
|
|
|
|
|
Joined: Apr 2003
Posts: 5
Member
|
|
OP
Member
Joined: Apr 2003
Posts: 5 |
<font face="Verdana, Arial" size="2">Originally posted by A6:
JW is right about the timer values. You can also shut off the timer value so there is no ringback. It isn't wise to do because the call would never ringback and they would have to hang up and call back in.
Why do you do two different pages? Why don't you do an All Call page (both internal and external)? This would cut the page time in half by only paging once instead of twice.
Or am I not understanding the question?</font> The attendant is doing an all page I beleive. It pages the phones then automaticly pages the external speakers with the digital recording that was saved on the feedback eleminator. This is the procedure: Call is parked, attendant pushes the all page button, and says the page into the handset, the feedback elem. runs, repeats the page once on the telephone handsets, the repeats the page once on the external speakers. JWRacedog: I am comfortable with doing that. I do not have much experence with the Vodavi as I learned all my stuff on a Nortel 0x32. I am out of the office for the next week traveling. I will get back to you when I get back in the office the week after this comming up one. Thank you both for your replies, Jason
|
|
|
|
Forums84
Topics94,300
Posts638,879
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
171
guests, and
224
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
