atcomsystems.ca/forum Forums Other TDM Phone Systems Other Telephones & Systems WIN 440CT Systems ???

Looking for more info on the WIN 440CT systems. I can’t tell if they manufacture the systems. When I called them they were evasive. Also I would like info on reliability and the user friendliness of these systems. Any input or direction where to get some more info would be greatly appreciated. I did a search on this forum and did not find very much good or bad about these systems.

Thanks

yes. u can visit this web site www.meisei.co.jp for more info about the manufacture.

This system is very reliable and user friendly.

Polytone, great site ---how did you get those chickens to scratch on that page?


KLD

I have been working in Win phone systems for many years. The Product is very stable. Like all new systems it may take some time to learn some of the access codes ect. Most phone systems are user friendly if the user would take the time to read the guides.

can a WIN model mk440ct take a PRI card, and is this a easy system to program, i ask because the only dealer left town and i am picking up some customers

yes.. win mk440ct can install PRI card..i have test the system using PRI connect to Alcatel,Nokia,ericson and etc..telecom exchange... OK..

this system very easy to program by using computer..

Win 440 in manufactured by Win Communications, there world headquaters is in Atlanta. I went to a week of school there to become certified for their system and you have to pass a test to be certified to install a PRI card in the system also. They are programmed with hyper terminal, but even easier with their GUI software, which has an Aladdin key for security. Overall they are ok, they are not easy to get a hold of either and unless you are a "Certified" installer with a pin# (which is given you after you pass the classes) you may have trouble getting tech support from them. The only thing I don't like is they don't have any system planners that are installer friendly, they can do alot, but they come with absolutely no preprogramming on them. I have installed several of them, one with PRI, they're not too bad. Their website is
www.win-phone.com

i have installed a few hundred win systems over the last 10 years, and have had nothing but success with them. there new smartvoice voicemail is awesome and the current ip offering is really cost effective for the customer. the pri solution is simple to install and have had no equipment related problems. any problems would be related to the installer not being certified. if you know how to program them you can stay competive in any market. they can grow to 7 networked sites via pri/t1/ip so technology is always advancing

I know and have installed many win systems over the years. Good system. Prog. is probably different than you're use to but not difficult.

Difficult? Heck no! I can program it backwards.
Itechaz is correct. WIN will only answer very basic questions to 'anyone' You must be certified (its an easy test) to get a book, a passcode, support etc.

If you use the HELP command, the system is fairly intuitive for the seasoned installer.

need help? Let me know...

Can somebody direct me to were I can get a Programing Manual on the 440ct. I heard that you can also use procomplus also. I need to update ringers and caller ID on it to show before the phone is picked up and not after. I would imagine that feature is avaible.

We are a certified Win dealer in Chicagoland (schaumburg) send me a PM and I can get you taken care of.

I also am in need of a 440ct programming manual. Any assistance would be APPRECIATED!!!
thx

any luck finding this manual?
I have the list of commands i dumped up from the command line, but a little more information on these commands would be helpful

To Kuvasz_1 and HCMAdmin,
I am a certified WIN tech and I work for an authorized WIN dealer.

I have the WIN 440CT System Programming manual in a PDF file. If you are still in need of it, please send a private message and include your email address and I will email the details to you.

Are these win systems programmable via handset or remotely once inside

Hello all,
Looking for a MK-36D manual.New customer called with one of these. Line 4 is defective and I need to remove from outgoing pool. 25 years in the business and I've never seen this system before. Any help would be appreciated

36d manual was never in PDF form only paper copy...

I am looking for a 440 CT programming guide as well. Any help would be appreciated. Thanks...Drew

Looking for a PEC cabinet EPIE card and the Cable can anyone help?

Westmore to the BB.

You will find that if you start a new thread poeple will find you quicker.

Have you checked the tabs at the top of the page?

Can someone help me? I have a PRI that can recieve inbound calls but I cannot get outbound to work. Also I believe I need a software upgrade for the 128 to work with the Flash drive voice mail...Can someone assist with this?

to the BB. Please start a new thread so someone may see your request quicker.

Also, you know that that switch is no longer made, don't you?

:shrug:

Good Luck.

Does anyone out there know where I can get a programming/Technical manual for the Win 440CT? I've tried to contact Win about certification and dealer info, but can't get them to reply. I filled out the on-line form and called twice and left v.m. messages. Any help or reply would be appreciated.

I have one .

Redeye22,
We used to be Win Dealers for over 10 years and one day Win told us that none of our company was allowed to get support because we did not sell enough of their systems. Over half of our system sales were Win! We even had most of the local Papa Johns on them! My boss called them to see what was going on and they would not support us anymore, so we became an all avaya shop. I liked how the Win programmed, and still work on them on existing customers, the Win company just frustrated us though.

I have a TON of WIN cards, if anyone needs something specific let me know. However, I am looking for a place to buy PRI-440CT cards... WIN no longer carries them and I have about 20 customers who are currently using them.

can anyone find a hasp usb dongle key for using the pmu software for the win-96ct