|
|
Joined: Mar 2001
Posts: 581
Member
|
OP
Member
Joined: Mar 2001
Posts: 581 |
hey guys
i,m dealing with my first ISDN line actually
two numbers on one pair. going to a cisco 800 router with 10 base-t lan connection.
the new windows xp computer cannot contact any web sites,home pages etc. anybody got nay ideas?
martin
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2002
Posts: 6
Member
|
|
Member
Joined: May 2002
Posts: 6 |
Sure give me a call and I'll try to figure it out over the phone for you. (888)400-4131
|
|
|
|
|
Joined: May 2001
Posts: 322
Member
|
|
Member
Joined: May 2001
Posts: 322 |
Martin I'm not sure what you are trying to setup but if you are just setting up a small LAN to access the internet with the Cisco router as the gateway then: Make sure you have all your settings correct in the router (IP addresses, DNS Servers, Gateway, ect) and does the ISDN connect? If it connects can the XP machine Ping the router? If so then can the XP machine ping www.yahoo.com (66.218.71.81). If you can not communicate from the XP machine to the router then it is a setup issue with the router or XP machine. Please e-mail me with any specifics and we can try to get the issue solved.
|
|
|
|
|
Joined: Mar 2001
Posts: 581
Member
|
|
OP
Member
Joined: Mar 2001
Posts: 581 |
thanks for the replies guys. this sure is a great list. what was blowing my mind was it was a move the config was working when i took
it out of the orig loc. after some research,
i found out the reseller changed numbers on me in order to increase his bottom line. he was supposed to move the same numbers. but to save money(or so he says). they had new numbers installed, i contacted the guy who installed the router and he walked me thru
putting in the new numbers. thanks again
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Martin, it appears your going to get plenty of help on this. Crabb had a very good question for you in asking if this was for internet access. The fact that you have an XP machine is not relevant. The cisco programs through your browser. I personally use 3-com for simple internet to network integration. way cheaper! You need both SPID numbers, you need the dial-up number for your internet provider presuming the provider supports ISDN, username and password from your provider, primary and secondary DNS. If the cisco is smart, it will detect the type of switch (co), If not you'll have to get that info. If this is a simple network leave DHCP enabled on the cisco and leave NAT enabled. Reboot everything and log on. It really is easier that you think. Remember you're a phoneman and we can do everything! Right Guys?
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from telbroker.com]](http://www.telbroker.com/sundance9.gif)
