atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems Night Mode

I have a ComDial Phone System, connected also is Comdial VM system "Small Office lite".

I have my VM extension working, OK. I can ring the extension from any phone. But when I set my Night Mode on any phone,the Night Mode will not ring the VM extension.

How can I set the extension that the Night mode Rings.

I'm using the VMMI software for Comdial System, Or is this set on the VM software??

Any help would be much appreciated, thank you in advance.

Which Comdial system are you using with the small office lite?

By saying you're using VMMI I assume you have a DXP,DXP PLUS, FX or MP5000. In the VMMI there is a listing under the voice mail ports to enable ringing for night service. You then have to program the voice mail time schedule, dialing properties, etc. Fairly intricate if you are not an experienced programmer.

BTW Welcome to the board!

Test-OK:

I have a Comdial DXP system. I could find it anywhere on the internal boards. But now that you were asking I see that its on the front face of the cover.

RBF:

I will take a look at the oprions. I was confused with all the options and setting. Hopefully this works, thanks.