|
|
|
|
Joined: May 2004
Posts: 16
Member
|
OP
Member
Joined: May 2004
Posts: 16 |
I have an old Prostar DCS. I was wandering if anyone could tell me how to program ringing on this system. I have it installed and have managed to get everything working. I just want to make all lines appear and ring on all phones.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
I assume you understand the programming?
Ringing is assigned in MMC 406.You can assign either a direct extension or a group.You must use a group if you want more than 1 phone to ring.If you do this then you must assign the group in MMC 601.Just make sure if you do this to set the ring type to unconditional and include all the extensions that you want to ring as members of the group.
For key programming use MMC 722.This is on a per station basis.
If all the phones are the same then you could use MMC723 for system key programming.
Or you can program 1 phone and use MMC720 to copy the key programming from 1 phone to another.
Direct trunk keys are DT7XX.Example a key code for a line 1 button would be DT701.
|
|
|
|
Forums84
Topics94,298
Posts638,870
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
96
guests, and
318
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
