|
|
Joined: Feb 2010
Posts: 18
Member
|
OP
Member
Joined: Feb 2010
Posts: 18 |
MY CALLER ID ON ESI-200 IS NOT WORKING I NEED TO KNOW HOW MUCH THE GAIN SHOULD BE IN ORDER FOR IT
TO WORK PROPERLY, I HAVE IT AT 2000 NOW.IT HAS ALWAYS BEEN, I HAD TELEPACIFIC COME AN CHECK
CALLER ID IS ACTIVE BEFORE IT HITS THE ESI-200
Sam
Installer Extraordinaire.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
|
|
|
|
|
Joined: Feb 2010
Posts: 18
Member
|
|
OP
Member
Joined: Feb 2010
Posts: 18 |
ya i know and its not working i keep getting
caller id read out (line 1--- line 2) etc
Sam
Installer Extraordinaire.
|
|
|
|
|
Joined: Jul 2003
Posts: 766
Member
|
|
Member
Joined: Jul 2003
Posts: 766 |
Are you sure CID is enabled in f24? You only see the line number in the display when CID is not enabled. If CID is enabled but not read you will only see an arrow in the display. > . Not LINE 1.
|
|
|
|
|
Joined: Feb 2010
Posts: 18
Member
|
|
OP
Member
Joined: Feb 2010
Posts: 18 |
ya i called esi-tech support and i had them clear my cid buffer, it was full, i had programed on all buttons a caller id button to see the last incoming calls, and that filled up my buffer, plus in order for me to not get this again i have to upgrade to newer version.. any ways esi tech support cleared my buffer and all is well now.. just a reminder to all your customers don't program a caller id button lol
Sam
Installer Extraordinaire.
|
|
|
|
|
Joined: Jul 2003
Posts: 766
Member
|
|
Member
Joined: Jul 2003
Posts: 766 |
Hm, every system I have has caller ID buttons on every phone, it's included in all of my button mapping. How many phones/lines are on this system?
|
|
|
|
|
Joined: Feb 2010
Posts: 18
Member
|
|
OP
Member
Joined: Feb 2010
Posts: 18 |
In response to Member 1510 i have a esi-200 rack
mount server with 8 analong lines.
Sam
Installer Extraordinaire.
|
|
|
|
|
Joined: Jul 2003
Posts: 766
Member
|
|
Member
Joined: Jul 2003
Posts: 766 |
Oh, It's an IP-200 not a CS-200? Never mind. Thanks.
|
|
|
|
|
Joined: Oct 2004
Posts: 110
Member
|
|
Member
Joined: Oct 2004
Posts: 110 |
When you put you butt set on the lines are you getting a single ring cadence from the the carrier or do you get a double ring cadence? ESI does not support caller-id with a double ring cadence. The reason is whent the first ring, goes ring, ring the system thinks it is acutally the second ring and wants the caller id data burst and does not receive it when the carrier sends it. If you are receiving a single cadence ring make a few test calls to the same line and listen with your butt set for the caller id data busrt(sounds like a modem connecting briefly). You should hear it come in consitantly at the same time during the ring cycle. If it is not consistant the ESI system will have an issue picking collecting the caller-id data. If all of this checks out ESI TS should be able to assist you with adjusting the caller-id gain. They should also be able to see the caller-id information coiming in on the system if it is receiving it.
Anthony Cascarelli ARG Communications, Inc. Wilmington, DE 190805 www.whyarg.com
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
155
guests, and
330
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
