|
|
Joined: Aug 2006
Posts: 1,796 Likes: 10
Moderator-Iwatsu
|
Moderator-Iwatsu
Joined: Aug 2006
Posts: 1,796 Likes: 10 |
Why a phone connected to the first card shows as port 26 could happen in a couple of ways, mostly depending on the initial installation.
Do you have the programming software?
The 408 cards connect 8 digital stations and 4 CO lines. The 8 stations start at the top, and the CO's connect starting at pair 17. The 8SUBM connects 8 analog stations with message waiting lights, NO CO lines. The 4VML is a voice mail card.
If the card farthest to the left was added after the system was originally installed, or is replacing a different type of original card, the port numbering may be different. With the cards as you have listed them, at default, the logical ports of the digital phones you have connected would start at 1, The next station card would start at 9 and so on. This system is a little bit screwy. Can you verify in programming that the slots all your cards are in are programmed properly as to type?
Just because none of this seems quite right anyway, try connecting your CO line to pair 17 of the OTHER 408 card just for the heck of it
Sometimes the thoughts in my head get so bored, they go for a stroll through my mouth. This is rarely a good thing.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2012
Posts: 9
Member
|
OP
Member
Joined: Jun 2012
Posts: 9 |
Unfortunately I have no software..Do you know of any good Priced IWATSU Techs that serve eastern Long Island?
|
|
|
|
Joined: Jun 2012
Posts: 9
Member
|
OP
Member
Joined: Jun 2012
Posts: 9 |
I also tried swapping out the cards and get nothing I have no idea what it may be and I'm having trouble locating an IWATSU tech on eastern Long Island. The IX-12KTD-3 only requires 1-pair to work in the system correct? since its digital. I have just one of those on the first 408(Its for the front desk) and then the 2nd 408 card has nothing on it and the 8SUBM just has the single line w/message light phones for the hotel rooms. It seems everyone phone is getting power but no tones except when I press a number down(Keytone)..IM IN DESPERATE NEED OF A TECH! AND TRULY APPRECIATE ANY ASSISTANCE.
|
|
|
Forums84
Topics94,298
Posts638,870
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
2 members (justbill, Toner),
131
guests, and
336
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|