atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems SMT-I5264 AOM Set up help

Hi All,
Firt time setting up the SMT 64 AOM and it's not cooperating, I'm following the setup instructions but when i open up my browser and type in the default IP I get nowhere.

do I need to download software etc.
I'm installing this tommorrow and i have everything working except for the AOM

thanks

You have to get the AOM into setup mode before you can access via the IP address. When powering up the AOM, press and hold the 2nd button in the 1st column. When the 3rd button in the 4th column flashes, press it, then release both buttons. You can then use the default IP to program it.

Way easier if you have a 5243 set.

Once you default the AOM IP address you should have no issue logging in.

Remember its not just the ip address you enter, but the ip and port 8080

Make sure not to connect your phone before you finish the setup. Hold the 2nd button while you're pluggning in the lan cable to aom and when it's flashing the second and third button on the right, press the third button.

If you have POE switch, you have to connect your computer to the same switch and change the ip address to 10.0.0.10 / 255.255.255.0 / 10.0.0.1

then launch the internet explorer to type https://10.0.0.3:8080