I am attempting to backup an NEC IMX2400 to my Laptop using IMX MAT and PCPro.
There is also the original NT4.0 workstation on site that I have attempted this from.

I have replaced the I/O 24 card and reset the system.

I can do MEM_HDD to both CPU's just fine. When I attempt to do HDD_MAT to any PC I get multiple failures. I can try this several times wasting several hours, then sometimes it works (3+ hours to do a full backup).

I have a serial connection to the 2400. it does have a LAN connection but I do not have autorization to be on the LAN (Government facility, strict security).

It sometimes takes me 4-5 hours of messing about to get a backup from the 2400.
I can do CMOD and switch CPU sides, but neither side will backup to MAT without a couple of hours of coaxing.

Any ideas?

Wish they would replace with an 8300, as the site has been reduced to only 250 or so users.

help?!?

[Linked Image from i8.photobucket.com]

D