|
|
Joined: Aug 2012
Posts: 8
Member
|
OP
Member
Joined: Aug 2012
Posts: 8 |
I've taken on this old PBX for my parish to make some CCR changes to. Never having seen one of these before I read the relevant sections of the manual and did some research here prior to having a go at it. I connected to the PBX and Flash VM card using the Hyperterminal trial (since Putty doesn't work correctly due to emulation) and was able to figure out the process of changing the CCR tables, flagging a station as virtual and fwding direct to VM etc. However after I was done I decided to download a copy of the database for safekeeping since no one has touched this PBX in years. I did the following:
,86 (flash 86)
W
ENTER
Set HT to receive using XMODEM. File downloaded for about 10 minutes before I received a "transfer limit exceeded" error from HT. After OKing the error the system was unresponsive to commands from HT. I rebooted my laptop hoping it was just HT but still no response from the KSU using HT. Has anyone seen this before? How do I get it "unstuck" or out of the download mode? I gave it about 10 minutes and decided to call it a day so perhaps it will just timeout?
Thank you
Thank you,
Sean Trimm
Systems Administrator
Trimm Networks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2007
Posts: 6,800 Likes: 18
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,800 Likes: 18 |
Are you using 9600, N,8,1 Do you have the Programming manual? Look on page D-8 for procedures. Here is a link to the manual
|
|
1 member likes this:
Corrupted DNA |
|
|
|
|
Joined: Aug 2012
Posts: 8
Member
|
|
OP
Member
Joined: Aug 2012
Posts: 8 |
Thank you for your response.
Yessir. Followed the steps as written, perhaps the "File Transfer Limit Exceeded" error from Hyperterminal is a limitation of their trial although I haven't found it listed (yet). Wil the KSU timeout and allow access via the serial port again or will it be "stuck" until it is rebooted? I'll be going back tomorrow, don't have access to it today.
Thank you,
Sean Trimm
Systems Administrator
Trimm Networks
|
|
|
|
|
Joined: Dec 2007
Posts: 6,800 Likes: 18
Retired Admin
|
|
Retired Admin
Joined: Dec 2007
Posts: 6,800 Likes: 18 |
Good luck. Personally, I have never tied downloading the STS.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
129
guests, and
368
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
