It's been a while since I've messed with a Mitel, but you should be able to use ars to select a line group, then have the trunks in that line group go to Asterisk.

Also, you'll need an fxs card in the Asterisk server to connect to a trunk circuit in the mitel. I don't know how to make calls go out of the Mitel on an analog station port, if that's what you're trying to do, if so then you'll need an fxo card in Asterisk.


[This message has been edited by junkman (edited April 14, 2005).]

Joe
---
No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.