Hi again guys.
Thanks for your help so far.
I powered off and on the KSU, but it still only displays the time since power on, and now 67-N G
-vs- 66-N G.
The dip switch settings were played with before I was onsite and I don't know the original settings, and there are no manuals whatsoever for this rig. As well the owner tells me that at one point the console was displaying NVRAM error.
I'm guessing the eeprom is probably corrupted, but I have no idea where to get firmware or how to go about re-flashing the unit.
I noticed that there's a rs-232 25 pin port. Can I telnet (or something equivalent) into this system?
Thanks
John
P.S. If anybody with any info at all on the sx-50 would email it to
[email protected] I would appreciated it greatly.
