atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Caller ID/ PRI on 4.0

I hate to see this question go unanswered so I'll take a blind stab at it (I just don't have time tonight to dig for the exact figures).

There is definately a finite amount of space in the call log (seems like it is 250 calls for the system). So, depending on the number of sets, you may not be able to configure much usable space for individual users.

What the carrier sends as outbound caller ID, depends on the carrier. Different carriers support it differently. If you had newer software (don't recall if 4.0 supports this, but I don't think so) you could configure unique Name and Number on a set-by-set basis. Of course, if you are sending that info to a carrier that only passes the number, there is not much (short of switching carriers) you can do.

Lastly, 4.0 is not exactly the most stable version of software. You may want to consider an upgrade to go along with that new PRI.

Good Luck!


------------------
BCM Guy
www.BCMguy.com
Learn more about the Nortel Networks Business Communications Manager HERE !