MICS: CFB = None but still goes to VM|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Re: MICS: CFB = None but still goes to VM #123851 06/19/05 11:23 AM
Joined: Dec 2004 Posts: 10 Walnut Creek, CA USA mwm Member
mwm Member Joined: Dec 2004 Posts: 10 Walnut Creek, CA USA	Your tips were all good and I appreciate it; --- the winner was DND-on-Busy. Cleared it and no more CF>vm. But why DND-on-Busy sends it to vm is still a mystery to me. Thanks again, mwm

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Entire Thread
Subject	Posted By	Posted
MICS: CFB = None but still goes to VM	[email protected]	06/13/05 02:23 PM
Re: MICS: CFB = None but still goes to VM	jwooten	06/13/05 03:00 PM
Re: MICS: CFB = None but still goes to VM	Texas Cowboy	06/14/05 06:09 AM
Re: MICS: CFB = None but still goes to VM	King tip and ring	06/14/05 11:37 AM
Re: MICS: CFB = None but still goes to VM	scott mccabe	06/15/05 02:23 AM
Re: MICS: CFB = None but still goes to VM	mwm	06/19/05 03:23 PM
Re: MICS: CFB = None but still goes to VM	Sydeshow MO	06/20/05 01:27 AM

Moderated by MooreTel

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems MICS: CFB = None but still goes to VM