|
|
|
|
Joined: May 2004
Posts: 187
Member
|
|
Member
Joined: May 2004
Posts: 187 |
I noticed the other day when I reset the power on this system that I lost programming, can the battery be replaced like the cics. also I can not get the ATA adapter to work properly, will call intercom but not dial 9 to outside line and when you call the single line ext. it rings once and disconnects, maybe not compatible???
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 135
Member
|
|
Member
Joined: Apr 2005
Posts: 135 |
have to change out the software pack thats where the battery is located.
You don’t drown by falling in the water. You drown by staying there.
|
|
|
|
|
Joined: Oct 2005
Posts: 6
Member
|
|
Member
Joined: Oct 2005
Posts: 6 |
The Software Cartridge has a capacitor in that is providing the battery backup, over time this capacitor goes bad. You can either replace the software cartridge or replace the capicitor, this can be done in the field with a soldering gun. The ATA problem sounds like it does not have access to that pool needed when you dial "9" I would check that first.
|
|
|
|
Forums84
Topics94,562
Posts640,148
Members49,863
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
67
guests, and
65
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
